Wednesday, November 24, 2010
How do you change a water pump in a 1998 Cadillac Deville?
My car is overheating sometimes and I can hear clicking when it runs, I know it might be the thermostat or radiator, but I think its the water pump. I have some experience working on cars, so I would like to do the work myself. I need to know where it is located, preferably step by step instructions. I know that the water pump is not leaking. What could it be and should i do?How do you change a water pump in a 1998 Cadillac Deville?Casey if your not sure its time to see the dealer or one of your local auto repair shops.Replacing parts that might not be the problem is going to cost more.Mechanics will test your cooling system and find what is the cause of your overheating and the noise your hearing.If you decide to replace your water pump you can get free removal and installation info on www.autozone.com Best of luck.
How do I take the water pump off 2004 impala after Ive removed all the bolts and took the pulley off?
Im trying to take my water pump off but im having problems. Ive took all the bolts off the pulley and the water pump it self. How can I get it off now??How do I take the water pump off 2004 impala after Ive removed all the bolts and took the pulley off?If you've taken all the bolts out and removed the pulley and it won't come off, chances are its stuck on by the gasket. It's no great problem just give it a few taps with a wood / rubber mallet to remove it. If you don't have a mallet to hand you can use a hammer and a piece of wood. Don't strike it directly with a hammer though, it would shatter. Put the wood against it and hit the wood with the hammer.
Once it is off make sure all of the gasket has been removed and the surface is smooth before fitting a new one.
Once it is off make sure all of the gasket has been removed and the surface is smooth before fitting a new one.
How to pump water from a water source to a water tank?
We are doing a project, and it's aimed for a community in Mali where they have a 10 month dry season. They have a swamp where they can extract water from. So we are looking to design a water pump that would feed the water into the tank. Does anyone know where could get more information on these types of water pumps, or has information on them?
ThanksHow to pump water from a water source to a water tank?Its been 20+ years since I last designed a water system (that was similar in many respects) so I don't remember the vendors. But you are either going to want a submersible pump or a verticle centrifugal pump to pull the water out of the swamp. Just google these and also google potable water pump.
You are going to have other issues such as head, flow and power requirements.
Other issues to worry about are your intake system and any screens and strainers to keep stuff out of area around the pump.
Good luck.
......................................?br>
As an add on, you might also want, depending on your system, to look at a portable fire water pump. It will get you thinking.How to pump water from a water source to a water tank?Present your question to your local water works dept. They may be delighted to give you some insight!how do you rent an apartment help finding niche
ThanksHow to pump water from a water source to a water tank?Its been 20+ years since I last designed a water system (that was similar in many respects) so I don't remember the vendors. But you are either going to want a submersible pump or a verticle centrifugal pump to pull the water out of the swamp. Just google these and also google potable water pump.
You are going to have other issues such as head, flow and power requirements.
Other issues to worry about are your intake system and any screens and strainers to keep stuff out of area around the pump.
Good luck.
......................................?br>
As an add on, you might also want, depending on your system, to look at a portable fire water pump. It will get you thinking.How to pump water from a water source to a water tank?Present your question to your local water works dept. They may be delighted to give you some insight!
How to remove a water pump on a 2000 VW Jetta?
I can seam to pull out the water pump and its hard to get to. I need to replace the water pump. Anyone have suggestions? TyHow to remove a water pump on a 2000 VW Jetta?I do all my own maintenance but the first thing I always do is buy a Chilton's manual at the local parts store and look up what I want to do.Sometimes you have to get special tools and sometimes you find that there is a shortcut or a safety precaution.Good luck and hope this helps.
How to replace the water pump on a 1988 Cougar?
Im replacing the water pump on my cougar but i ran into a snag. I got the pump unbolted but to take it off, i need to unbolt a bracket that goes behind the power steering pump pulley. I cant figure out how to get that pulley off to take off the bracket. Any help with this would be greatly appreciated. Thank you.How to replace the water pump on a 1988 Cougar?go to autozone.com and look it up. You can price the parts while you're there. I think it has an electric fan and you might have to take out the entire assembly to get to the crank pulley. You'll need to remove that, the belt, the pulley, then the water pump. Replace pump and gasket; oh, and all the water that spilled out because I forgot to tell you to drain it... nevermind, I just read the rest of your question. Try this:
If equipped remove the A/C drive belt and the idler pulley bracket. Remove the alternator drive belt.
Remove the power steering drive belt and the power steering pump. Do NOT disconnect the power steering pump lines.
The rest of the instructions can be found here:
http://www.autozone.com/servlet/UiBroker
Hope that helps, if not, go get you a chilton's or hayne's manual - they come in handy for lots of things.How to replace the water pump on a 1988 Cougar?remove radiator,remove fan blade,you may have to move the a/c condenser and or compressor. and move the alternator out of the way. scrape gasket off engine block. glue new gasket to water pump and install in reverse. be sure not to over tighten the bolts.How to replace the water pump on a 1988 Cougar?it would have helped if you had given an engine size of the car the procedure is different for a v-8,and a v-6 engine,i cant answer this because i don't know an engine size,,good luck,i suggest you get a good repair manual its more informative ,and gives real good details also.
If equipped remove the A/C drive belt and the idler pulley bracket. Remove the alternator drive belt.
Remove the power steering drive belt and the power steering pump. Do NOT disconnect the power steering pump lines.
The rest of the instructions can be found here:
http://www.autozone.com/servlet/UiBroker
Hope that helps, if not, go get you a chilton's or hayne's manual - they come in handy for lots of things.How to replace the water pump on a 1988 Cougar?remove radiator,remove fan blade,you may have to move the a/c condenser and or compressor. and move the alternator out of the way. scrape gasket off engine block. glue new gasket to water pump and install in reverse. be sure not to over tighten the bolts.How to replace the water pump on a 1988 Cougar?it would have helped if you had given an engine size of the car the procedure is different for a v-8,and a v-6 engine,i cant answer this because i don't know an engine size,,good luck,i suggest you get a good repair manual its more informative ,and gives real good details also.
How does the radiator fan work if I replace my water pump with an electric water pump?
I have a 93 Mustang GT Convertible. The water pump went out and needs replaced. I want to replace it with an electric water pump. The problem is that the radiator fan is driven by the water pump pulley and the new electric water pump has no such pulley for a fan.How does the radiator fan work if I replace my water pump with an electric water pump?If you go to the electric pump you'll also have to go with an electric fan. However, in every car I've done this to in the past, you'll also need a high amp alternator to handle the extra load this will put on the electrical system.
BTW. Several people have asked why would you do this. You do this to free up a few horsepower by not having the extra load of the pump and fan on the engine. A higher amp alternator doesn't use any more horses to turn. The other alternative that does not work on the street though would be to do what some drag car owners do. They remove water pump, alternator, fan, and power steering. Very few horses can make a big difference in a close quarter mile pull.How does the radiator fan work if I replace my water pump with an electric water pump?%26gt;%26gt;%26gt; electric water pump?
I didn't know they made electric water pump. Are you sure?
Remember that all electrical devices have to be driven by the alternator. Putting something that draws that much current will wear out the alternator faster.
===
You can always replace your fan with electric fan. That I KNOW they make.
Good Luck...How does the radiator fan work if I replace my water pump with an electric water pump?You'll have to install an elec cooling fan on rad also. Then you would install a temperature switch to turn it on when needed.How does the radiator fan work if I replace my water pump with an electric water pump?first off why replace a vital engine part with an aftermarket gamble anyway and second it wontHow does the radiator fan work if I replace my water pump with an electric water pump?i never heard of electric water pump, all i ever saw was a pump that ran by a belt.
BTW. Several people have asked why would you do this. You do this to free up a few horsepower by not having the extra load of the pump and fan on the engine. A higher amp alternator doesn't use any more horses to turn. The other alternative that does not work on the street though would be to do what some drag car owners do. They remove water pump, alternator, fan, and power steering. Very few horses can make a big difference in a close quarter mile pull.How does the radiator fan work if I replace my water pump with an electric water pump?%26gt;%26gt;%26gt; electric water pump?
I didn't know they made electric water pump. Are you sure?
Remember that all electrical devices have to be driven by the alternator. Putting something that draws that much current will wear out the alternator faster.
===
You can always replace your fan with electric fan. That I KNOW they make.
Good Luck...How does the radiator fan work if I replace my water pump with an electric water pump?You'll have to install an elec cooling fan on rad also. Then you would install a temperature switch to turn it on when needed.How does the radiator fan work if I replace my water pump with an electric water pump?first off why replace a vital engine part with an aftermarket gamble anyway and second it wontHow does the radiator fan work if I replace my water pump with an electric water pump?i never heard of electric water pump, all i ever saw was a pump that ran by a belt.
Can a pool pump be used to pump water from a tank to a dwelling?
Have a shack next to a water pump, and the old pump there seems to be knackered. Have an old pool pump which I thought about using in place of it, but suspect it may not be suitable, as it would be constantly pumping water, and not sure what might happen with the taps turned off! Trying to find look around on the net for some tips (on even how to troubleshoot the existing pump), but there doesnt seem to be much about. Any Ideas?Can a pool pump be used to pump water from a tank to a dwelling?Most Pool pumps are not designed to pump up, they are what is called a circulatory pump. You can buy a cheap pump for 30.00 on up at Harbour Freight tools, or you can have the old pump rebuilt.Can a pool pump be used to pump water from a tank to a dwelling?The key is the switching mechanism. You need some sort of electronic flow switch or a manual sump pump switch to detect water levels.Can a pool pump be used to pump water from a tank to a dwelling?Water pumps for wells or tanks have engines powerful enough to move the water where it needs to go (in my case, uphill). Pool pumps (depending on HP) may not have that kind of power, they are just built to recirculate water.
Even if you don't have to move the water long distances, a pool pump would be constantly pumping, which would burn out the pump, or might even blow your pipes. The pump has to have a pressure switch or the tank has to have a float switch to make it shut off when the system is full.
You could try to get it to fill temporarily with a pool pump, but it would be drained the moment you opened the taps or flushed.
We got our well pump from Sears a few years ago. Sears should have some info on their web site. Also you should do a bit of sleuthing for plumber sites about wells and water tanks, and well pumps. This is a common topic for rural dwellers. We found some sites when we changed our pump (about 3 years ago) that had some good info.
Good luck and let me know if you have any other questions.Can a pool pump be used to pump water from a tank to a dwelling?The pump will do what you would like except for the fact that you do not want the pump running when the faucet is closed, water must flow some where or the pump will burn up trying to pump the water that is going no where. It must be shut off when not in use. Most well pumps pump water into a holding tank which has a bladder inside that fills up and shuts the pump off when the bladder reaches a certain pressure. The pressure in the bladder is used to supply water pressure when the pump is not running, when a faucet is turned on the pressure in the bladder reduces to a point then the pump will turn on again to re-fill the bladder in the holding tank. You could install a regular tank like a 50 gallon drum on the roof of the shack, have a switch to turn the pump on when you need to fill the drum. The tank being located above where the faucet is located will supply the pressure needed to get water out of the faucet.Can a pool pump be used to pump water from a tank to a dwelling?best to contact the plumber or the brand of ur pump as it may void warrantyCan a pool pump be used to pump water from a tank to a dwelling?First of all you need to be sure that the pump has failed and not just the motor. Pumps fail when the shaft seal leaks and you get more water dripping out the shaft seal than the pump is pushing. If it;s the motor, then you might be able to buy just a replacement motor and attach the old pump to the new motor.
As for a smimming pool pump, I think it would work, depending upon the flowrate and pressure you are looking for. My pool pump puts up about 20 lbs discharge pressure, but only a couple of gallons per minute. If you need large volume flow and higher pressure, you will want to look for another pump.Can a pool pump be used to pump water from a tank to a dwelling?YOUR PRESSURE TANK ON A WEEL SYSTEM IS THE SHOCK ABSORBER... IF YOU SHUT THE VALVE, B-4 THE PUMP HAS STOPPED ( WITH OUT A PRESSURE TANK ) YOUR PIPES EXPLODE! WATER DOES NOT COMPRESS!Can a pool pump be used to pump water from a tank to a dwelling?The electrical control system for a well pump includes a high pressure shutoff switch so that the pump will shutdown when there is enough pressure in the system.
This serves two functions, first it saves energy, second, it prevents the pump from overheating.
A pump overheats because the motor is suppling energy to the fluid being pumped. That energy exhibits itself as both pressure, and increased temperature.
Normally if there is flow through the pump the increase in temperature is barely measurable because there is a high flow of water and the energy is dispersed over the hundreds of gallons of water that is being pumped by the pump, however, if no water is flowing through the pump, less than a gallon of water is absorbing all of the energy from the pump, and that water can rapidly heat up and even start boiling.
There are three very important design factors that an engineer would look at when designing a pump for a given service:
1) What Discharge Pressure do I need?
2) What Flow do I need?
3) What will the suction pressure be at the pump?
All three of these factor into the choice of pump for the application.
Usually a well pump would be designed to turn on when the pressure drops to about 30 psig, and turn off when the pressure is above 50 psig. 15 to 40 gpm would be a typical design flows for a well pump, and the suction conditions are going to depend on the location of the pump in relation to the location of the water.
Some pumps are designed for %26quot;Suction Lift,%26quot; Others have to be lowered into the water and run submerged because they are not designed to %26quot;lift%26quot; the water.
In either case, the feet of lift has to be figured into the design of the pump and subtracted from the discharge pressure.
Because of these 3 factors, a pump designed for one service seldom will work in another service.
If the pump does not have enough suction lift, it will gas up and stop pumping (and overheat)
If a pump does not have enough discharge pressure, it won't be able to make it up to the second floor, or even the first floor, AND the pump discharge pressure will never hit the pump shutoff pressure, it will run all of the time and overheat.
And if a pump does not have enough flow, you will not be able to do things the way your are used to doing them, for example, your watering system may just dribble, or you might only get a small flow at the shower.
If you have any operating data or design data on the pool pump you could determine if it has a discharge pressure and flow that is in the ballpark as a temporary replacement for your well pump. It likely does not, but it doesn't hurt to check.
If the pool pump somehow happens to be a match on pressure and flow, it still may not be a match for the suction lift. Unless you have spec sheets for the pool pump you will not know one way or another. You could try to install the pool pump with the intent of removing it if it did not work.
As for the pressure shutdown, that is normally should be tied into the electrical supply to the pump. As long as you wire the pump up using the same electrical systems you should be ok. (Make sure the wiring is large enough for the new pump!)
Again though, I will stress that the chances of the pumps matching well enough to interchange them is very low!
Even if you don't have to move the water long distances, a pool pump would be constantly pumping, which would burn out the pump, or might even blow your pipes. The pump has to have a pressure switch or the tank has to have a float switch to make it shut off when the system is full.
You could try to get it to fill temporarily with a pool pump, but it would be drained the moment you opened the taps or flushed.
We got our well pump from Sears a few years ago. Sears should have some info on their web site. Also you should do a bit of sleuthing for plumber sites about wells and water tanks, and well pumps. This is a common topic for rural dwellers. We found some sites when we changed our pump (about 3 years ago) that had some good info.
Good luck and let me know if you have any other questions.Can a pool pump be used to pump water from a tank to a dwelling?The pump will do what you would like except for the fact that you do not want the pump running when the faucet is closed, water must flow some where or the pump will burn up trying to pump the water that is going no where. It must be shut off when not in use. Most well pumps pump water into a holding tank which has a bladder inside that fills up and shuts the pump off when the bladder reaches a certain pressure. The pressure in the bladder is used to supply water pressure when the pump is not running, when a faucet is turned on the pressure in the bladder reduces to a point then the pump will turn on again to re-fill the bladder in the holding tank. You could install a regular tank like a 50 gallon drum on the roof of the shack, have a switch to turn the pump on when you need to fill the drum. The tank being located above where the faucet is located will supply the pressure needed to get water out of the faucet.Can a pool pump be used to pump water from a tank to a dwelling?best to contact the plumber or the brand of ur pump as it may void warrantyCan a pool pump be used to pump water from a tank to a dwelling?First of all you need to be sure that the pump has failed and not just the motor. Pumps fail when the shaft seal leaks and you get more water dripping out the shaft seal than the pump is pushing. If it;s the motor, then you might be able to buy just a replacement motor and attach the old pump to the new motor.
As for a smimming pool pump, I think it would work, depending upon the flowrate and pressure you are looking for. My pool pump puts up about 20 lbs discharge pressure, but only a couple of gallons per minute. If you need large volume flow and higher pressure, you will want to look for another pump.Can a pool pump be used to pump water from a tank to a dwelling?YOUR PRESSURE TANK ON A WEEL SYSTEM IS THE SHOCK ABSORBER... IF YOU SHUT THE VALVE, B-4 THE PUMP HAS STOPPED ( WITH OUT A PRESSURE TANK ) YOUR PIPES EXPLODE! WATER DOES NOT COMPRESS!Can a pool pump be used to pump water from a tank to a dwelling?The electrical control system for a well pump includes a high pressure shutoff switch so that the pump will shutdown when there is enough pressure in the system.
This serves two functions, first it saves energy, second, it prevents the pump from overheating.
A pump overheats because the motor is suppling energy to the fluid being pumped. That energy exhibits itself as both pressure, and increased temperature.
Normally if there is flow through the pump the increase in temperature is barely measurable because there is a high flow of water and the energy is dispersed over the hundreds of gallons of water that is being pumped by the pump, however, if no water is flowing through the pump, less than a gallon of water is absorbing all of the energy from the pump, and that water can rapidly heat up and even start boiling.
There are three very important design factors that an engineer would look at when designing a pump for a given service:
1) What Discharge Pressure do I need?
2) What Flow do I need?
3) What will the suction pressure be at the pump?
All three of these factor into the choice of pump for the application.
Usually a well pump would be designed to turn on when the pressure drops to about 30 psig, and turn off when the pressure is above 50 psig. 15 to 40 gpm would be a typical design flows for a well pump, and the suction conditions are going to depend on the location of the pump in relation to the location of the water.
Some pumps are designed for %26quot;Suction Lift,%26quot; Others have to be lowered into the water and run submerged because they are not designed to %26quot;lift%26quot; the water.
In either case, the feet of lift has to be figured into the design of the pump and subtracted from the discharge pressure.
Because of these 3 factors, a pump designed for one service seldom will work in another service.
If the pump does not have enough suction lift, it will gas up and stop pumping (and overheat)
If a pump does not have enough discharge pressure, it won't be able to make it up to the second floor, or even the first floor, AND the pump discharge pressure will never hit the pump shutoff pressure, it will run all of the time and overheat.
And if a pump does not have enough flow, you will not be able to do things the way your are used to doing them, for example, your watering system may just dribble, or you might only get a small flow at the shower.
If you have any operating data or design data on the pool pump you could determine if it has a discharge pressure and flow that is in the ballpark as a temporary replacement for your well pump. It likely does not, but it doesn't hurt to check.
If the pool pump somehow happens to be a match on pressure and flow, it still may not be a match for the suction lift. Unless you have spec sheets for the pool pump you will not know one way or another. You could try to install the pool pump with the intent of removing it if it did not work.
As for the pressure shutdown, that is normally should be tied into the electrical supply to the pump. As long as you wire the pump up using the same electrical systems you should be ok. (Make sure the wiring is large enough for the new pump!)
Again though, I will stress that the chances of the pumps matching well enough to interchange them is very low!
Subscribe to:
Posts
(Atom)