Wednesday, November 24, 2010

How to replace the water pump and thermostat on 1987 corolla?

I'd really rather not take it to a shop and pay the extra $300 or whatever for labor. Is it easy enough to do yourself? How do you do it? My Corolla is a 1987 FWD Sedan. I think it's the single overhead cam not the dual but it shouldn't make that big of a difference in terms of difficulty. Just a note, I have worked on cars before - and more then once on this car, just haven't done a water pump before. Anyone know?How to replace the water pump and thermostat on 1987 corolla?You really ought to ante up for a Chilton's or Haynes repair manual. Its only $20. Even if it doesn't have all the answers, its usually enough to get you on the right track, or tell you if its a repair you want to tackle yourself.How to replace the water pump and thermostat on 1987 corolla?remove the radiator, the fan, the fan clutch,. than you should be at the thermostat housing or water pump. remove that housing. the thermostat should be in there. make sure when you put it back together that you use a gasket and or some kind of gasket sealer or it will leak.

What is a water pump in a car? How much is it to replace?

And if it needs to be replaced, does that spell trouble for a car? I see a car I might like to buy, but the ad says that the water pump needs to be replaced. Someone please enlighten me. Thanks.What is a water pump in a car? How much is it to replace?Most water pumps are fairly cheap either new or rebuilt. Get it replaced it keeps the engine cooled off and prevents overheating.



Personally I would avoid that car unless the owner replaces the pump first. The cost is only $100 - $200 for most cars. By him replacing it you will be able to see how the car runs after, any rattling or knocking means it is toast already and not worth any more than scrap iron.What is a water pump in a car? How much is it to replace?depends on the car some are cheap and simple some are high and a big thing --as cheap as 100.00 at a shop or as much as 1000.00 depends on carWhat is a water pump in a car? How much is it to replace?Seller knows having a bad pump hurts the car's value.



How big a piece of crap is this car that they won't change the pump before trying to sell?What is a water pump in a car? How much is it to replace?Well you could ENLIGHTEN us of what car/truck that you are talking about.What is a water pump in a car? How much is it to replace?The water pump circulates the water form the radiator to the engine to help keep it from overheating. prices for water pumps range anywhere from @ $30 - $100+ and that is just the cost of the pump itself and not including the labor to install it.What is a water pump in a car? How much is it to replace?if you don't know what a water pump is you should just walk away from this car due to the fact that you will not know what else to look for and it may be a very very costly mistake for you to buy this car, now to answer you question on what is a water pump. a water pump circulates the water and coolant though the motor in to the radiator to keep your car from over heating. thing (bad things)can happen when a water pump fails like cracked and warped heads blown gaskets etcWhat is a water pump in a car? How much is it to replace?Don't buy it. I'm going through the same thing that I will fix myself and if it weren't mine I wouldn't do it for cheap either. So many things can be in the way. Also maybe it could be a headgasket which is even worse.What is a water pump in a car? How much is it to replace?Dony buy it, its probably god a blown headgasket. Depending on what year and model it is, waterpumps can be from 300 to over 800 dollars, theyre usually not easy to get to, unless youre a dodge or gm truck owner.What is a water pump in a car? How much is it to replace?I'd suggest don't buy it. The water pump cools the engine. My guess is that the person selling the car overheated the engine and knows what problems that will cause and wants to unload it on someone.



Buyer BEWARE when buying used cars.What is a water pump in a car? How much is it to replace?the water pump is what keeps the engine cool in the car if it has a bad one on it there is a small chance that it might have been drove a little hot,and this can hurt the engine in one,it can actually ruin a good engine,id be care full if i was buying this one ,it might be one to stay away from the water pump circulates the coolant all through the engine,if ts gone out it will cost a little money to replace it,just be care full you can get burned on this car real bad ,good luck with it,i hope this help,s.What is a water pump in a car? How much is it to replace?when they said it need water pump that spell big trouble!!!! when water pump went out it caused the car over heated when the car over heated it could be million thing like blow head gasket special in the older car, if you get it cheap enough or vary love the car you can check the oil to see if water mix with it or try to start it up see if it smoking if none of those exit you probably okey to buy but save a lot money for repair later on.What is a water pump in a car? How much is it to replace?I have been in the automotive cooling business for over 25 years and Michael is exactly right. Depends on the make model and year . Usually normal wear and tear on a car will cause the pump to fail it is a fast moving part but at the same rate have some one point out the cooling systems recovery bottle and look inside of it and take a whiff. If it looks bad and smells bad that could be your sign to move on to the next car. Look for rust colored stuff in the coolant bottle BUT if it is a GM product after 95 i believe they have orange coolant so don't let that through you off either.What is a water pump in a car? How much is it to replace?IT spells trouble for the car if you don't replace the waterpump. Waterpump pumps water through your engin block to keep it cool. No Water, the engine block freezes, nothing moves, engine block may crack, time for a new motor or another car.What is a water pump in a car? How much is it to replace?a water pump circulates the coolant thru the radiator to keep the engine cool. Some are outside of the engine and fairly easy to replace. others are stuck in at rediculous places and require special tools and dynamite to remove. It better be an awful nice car but at least the seller was honest about it so maybe he would be honest about th rest of the car. Its not a BIG expense but maybe you sould get an estimate so you know and can add that to what you will have to pay for the car. and get it fixed right away so you don't have to replace the engine too.
  • myspace images
  • hair straightening
  • How can I test how high a water pump can pump to, using only pressure simulation?

    A pump is said to be capable of pumping water up to 100 meters, but I don't want to confirm that by actually putting up a very long pipe to that height. I know that pressure is related to height, so putting pressure at the output end of the pump would simulate different heights. Any suggestions how I can rig a contraption to do this? Thanks.How can I test how high a water pump can pump to, using only pressure simulation?*you can go by the 1st answer as pressure gauge near the pump discharge would give a maximum pressure inclusive of losses.

    As the losses are more[due to piping congetion or rasistance from the equipment to which it is pumping.] then the discharge head will be decreased.



    *Simply, in case of a centrifugal pump,close the discharge valve fully for a moment and check the discharge pressure.

    This is the maximum pressure ,your pump will pump.

    *Dont do this if the pump is positive displacement pump/regenerative turbine pump.



    Edit: Discharge head means pumping height in your case.How can I test how high a water pump can pump to, using only pressure simulation?Install a pressure gauge at the pumps diischarge line and note that p=wh. H =p/w, H =p{(144)/62.4}/3.28 meters

    Pressure expected therefore in psi, is p={62.4/144}3.28

    p=14.9 psi

    A pressure gauge of 0 to 50 psig range would be sufficient to indicate the expected pressure.

    Does a water pump has to leakin to be bad?How can I tell if my water pump is workin?

    I took out the thermostat, filled coolant level to upmost, %26amp; my car still overheats, %26amp; it doesnt leak ne where.How can I tell if the water pump is workin?Does a water pump has to leakin to be bad?How can I tell if my water pump is workin?Overheating normally would require a failed water pump. Some liquid leaking out of the weep hole normally just indicates that the pump is going to fail. Does the water pump make a clicking sound? An abnormal pump sound also is an indicator of a pump that is starting to fail.



    Verify that the coolant is full. If full, check the fan. If the fan is not turning on between 185 to 225, the temperature sensor may be bad.



    Also verify that the thermostat is installed in the correct direction. If installed backwards, the engine will overheat quickly. (This is an easy mistake.)



    Good luck!Does a water pump has to leakin to be bad?How can I tell if my water pump is workin?check your fan thermostatDoes a water pump has to leakin to be bad?How can I tell if my water pump is workin?check rad,hoses,fan censersDoes a water pump has to leakin to be bad?How can I tell if my water pump is workin?by the sound of it, no the water pump is not working. i had the same problem with my car. it started over heating, so i replaced the radiator cap, still over heated. replaced the thermostat, and still over heated. finally i took off the water pump, to find that the fins that are inside the punp, ( that move the water around) had all corroded away. i replaced the water pump with a new one, and its been running great ever since.Does a water pump has to leakin to be bad?How can I tell if my water pump is workin?if you can look down inside the radiator watch the water see how it moves.... check you hoses if any of them are soft or fat looking.... and it dont have to leak to be bad but in most cases it leaks..... most of the time when a car over heats its a flow thingDoes a water pump has to leakin to be bad?How can I tell if my water pump is workin?water pumps are generally built with a weephole ( a spot where if coolant enters the internals in the pump it will leak out externally)



    it could be a blockage in the system somwhere, radiator, engine block, or heater core

    How do you change a water pump in a 1998 Cadillac Deville?

    My car is overheating sometimes and I can hear clicking when it runs, I know it might be the thermostat or radiator, but I think its the water pump. I have some experience working on cars, so I would like to do the work myself. I need to know where it is located, preferably step by step instructions. I know that the water pump is not leaking. What could it be and should i do?How do you change a water pump in a 1998 Cadillac Deville?Casey if your not sure its time to see the dealer or one of your local auto repair shops.Replacing parts that might not be the problem is going to cost more.Mechanics will test your cooling system and find what is the cause of your overheating and the noise your hearing.If you decide to replace your water pump you can get free removal and installation info on www.autozone.com Best of luck.

    How do I take the water pump off 2004 impala after Ive removed all the bolts and took the pulley off?

    Im trying to take my water pump off but im having problems. Ive took all the bolts off the pulley and the water pump it self. How can I get it off now??How do I take the water pump off 2004 impala after Ive removed all the bolts and took the pulley off?If you've taken all the bolts out and removed the pulley and it won't come off, chances are its stuck on by the gasket. It's no great problem just give it a few taps with a wood / rubber mallet to remove it. If you don't have a mallet to hand you can use a hammer and a piece of wood. Don't strike it directly with a hammer though, it would shatter. Put the wood against it and hit the wood with the hammer.



    Once it is off make sure all of the gasket has been removed and the surface is smooth before fitting a new one.

    How to pump water from a water source to a water tank?

    We are doing a project, and it's aimed for a community in Mali where they have a 10 month dry season. They have a swamp where they can extract water from. So we are looking to design a water pump that would feed the water into the tank. Does anyone know where could get more information on these types of water pumps, or has information on them?



    ThanksHow to pump water from a water source to a water tank?Its been 20+ years since I last designed a water system (that was similar in many respects) so I don't remember the vendors. But you are either going to want a submersible pump or a verticle centrifugal pump to pull the water out of the swamp. Just google these and also google potable water pump.



    You are going to have other issues such as head, flow and power requirements.



    Other issues to worry about are your intake system and any screens and strainers to keep stuff out of area around the pump.



    Good luck.



    ......................................?br>


    As an add on, you might also want, depending on your system, to look at a portable fire water pump. It will get you thinking.How to pump water from a water source to a water tank?Present your question to your local water works dept. They may be delighted to give you some insight!
  • how do you rent an apartment
  • help finding niche
  •