Monday, September 19, 2011

How do I remove fan hub from 94 lincoln in order to replace water pump?

i have fan blades loose I have 3 of4 water pump bolts loose. I need to remove fan hub before I go on. also I need to place fan on new water pump. have worked on many cars but this is first Lincoln. also antilock brake motor is running constantly and brakes are VERY touchy. right now I have the battery cables off.

I need help. Ineed this car back on the road.How do I remove fan hub from 94 lincoln in order to replace water pump?Been awhile since I've done a Lincoln but all fan blade hubs are ether held on by bolts (which means you have to wiggle like heck to get them off, some seize very tight due to the hub being aluminium and the shaft being steel, have had to buy a new hub in some cases) or the hub is screwed on to the shaft. If it is screwed on then there will be a big hex nut at the back of the hub to put a wrench on to unscrew it from the water pump. This will also be a left hand thread so turn in the opposite direction to loosen.

Yous ABS motor running constantly sounds like the accumulator is shot and needs to be replaced.How do I remove fan hub from 94 lincoln in order to replace water pump?should be 4 nuts holding fan on, you might need to wiggle fan some to get it offHow do I remove fan hub from 94 lincoln in order to replace water pump?the fan is bolted to the fan clutch. the fan clutch must be removed to replace the water pump. there is a large nut that holds the fan clutch to the water pump. it takes a special tool to hold the fan clutch and loosen the nut. you will need to fan blade bolt back to the fan clutch to do this. also the nut is reverse thread. you can borrow or rent the tool from autozone, checker, schucks, kragen.

No comments:

Post a Comment